Kohler Courage XT-6 - Page 74

10.8
Section 10
Reassembly
Install Flywheel Assembly
:$51,1*'DPDJLQJ&UDQNVKDIWDQG
Flywheel can Cause Personal Injury!
ȱȱȱȱȱȱĚ¢ȱȱȱ
ȱȱȱĞȱȦȱĚ¢ǯȱȱȱ¢ȱ
causes extensive engine damage, but can also cause personal
¢ǰȱȱȱȱȱȱȱȱȱ
ǯȱ¢ȱȱȱȱȱȱȱ
ȱȱȱȱȱĚ¢ǯ
DZȱ ȱȱȱĚ¢ȱȱȱȱ
ĞȱȱȱĚ¢ȱȱȱǰȱ
dry and completely free of lubricants. The
ȱȱȱȱȱȱĚ¢ȱ
to be over stressed and damaged when the
ȱȱȱȱȱęǯ
DZȱ ȱȱȱĚ¢ȱ¢ȱȱȱ
¢ȱȱȱ¢¢ǯȱȱĚ¢ȱȱ
become cracked or damaged if the key is not
properly installed.
DZȱ ¢ȱȱȱĚ¢ȱȱȱȱȱ
ȱĚ¢ȱȱȱȱĚ¢ȱ
fastener. Do not use any type of bar or
ȱȱȱȱĚ¢ȱȱǰȱ
as these parts could become cracked or
damaged.
Figure 10-27. Installing Breather Cover.
3. Align the teardrop slot on the fan with the raised
ȱȱȱĚ¢ǯȱȱȱȱȱȱ
ȱĚ¢ǰȱȱȱȱȱȱȱ
nut.
ȱ Śǯȱ ȱȱĚ¢ȱȱǰȱȱȱĚ¢ȱ
still while simultaneously torquing the nut to
51.5 N·m (456 in. lb.). See Figure 10-29.
ȱ ŗǯȱ ȱȱ¢ȱȱȱĞȱ¢¢ǯȱȱ
sure key is fully seated. See Figures 10-27 and
10-28.
ȱ Řǯȱ ȱȱĚ¢ȱȱȱĞȱȱ
the keyway with the key. See Figure 10-28.
Figure 10-28. Installing Flywheel.
Figure 10-29. Torquing Flywheel Nut.
Keyway
Teardrop
Flywheel Key
Breather
Cover