Kohler Curtis AC F2-T User Manual

APPENDIX D
Curtis AC F2-A, F4-A, F6-A Motor Controllers – FOS 4.5 – April 2022 Return to TOC
pg. 260
not select those either. Rather, use any of the four methods shown below to open the Project Explorer
dialog box. New projects will be created (set up) using this Project Explorer window. e rst step in
creating a new project is to create the project itself. Devices are then added to the project (see Step
2c). Devices added to a project (i.e., within a saved project) can always be edited or deleted from the
project. e steps to create a project with an F-Series controller are as follows:
Step 1: Open the Project Explorer dialog box (window) by using one of these New Project methods.
Step 2 – 3: Within Project Explorer, work from the top-down completing each entry. If an entry’s
value is unknown, use the default. Entries are always editable by re-opening the saved
project’s Project Explorer window and following these same steps.
Ctrl + N
1
2

Kohler Curtis AC F2-T Specifications

General

Brand	Kohler
Model	Curtis AC F2-T
Category	Controller
Language	English