Rear wash:
Water temp: mid
Water flow intensity: mid
Ejection position: dial 3
Spiral wash:
Water temp: mid
Water flow intensity: mid
Ejection position: dial 3
Seat temp: mid
Wind temp: mid
Night light: ON
Energy saving: OFF
Auto cover OPEN/CLOSE: ON, distance mid
Auto flush function: ON
Auto UV function: ON
Electrolyzed water function: ON
Deodorizer: ON
Confirm if inlet valve is OPEN.
Confirm battery has been installed in the “remote” correctly
Confirm no obstacle in front of product.
After toilet self-inspection completed, it is normal to hear motor rotating and water flow noise. When night light blink
indicates self-inspection is in process.
Default ex-work status for initial use:
Front wash：
Water temp: mid
Water flow intensity: mid
Ejection position: dial 3
Preparations before the initial use
Fig.#21
The above settings are for the full-functional version. For differences in the specifications of models, refer to their
product configuration matrix.
To Next Page
Loading...
