Fig.#4
Fig.#5
A.
*
Antibacterial: the seat contains long term inorganic anti-bacteria material which will inhibit bacteria growth on surface, this does not represent the mildew and other incidental effects. The
antibacterial rate is more than 90%. (Perform test in accordance with GB21551.2-2010 requirements. Testing lab: China household electrical appliances testing institute; electromechanical
products testing technology center of Shanghai Entry-Exit inspection and quarantine bureau.)
Overall Sketch
PREPARATIONS BEFORE INSTALLATION
Hold the rim of the vitreous shell and take the toilet out.
WARNING: Risk of personal injury and product damage! Please do not hold the rim of the bidet seat when lifting the
toilet. As the toilet is heavy, please seek help if necessary.
Note: do not remove cover and seat protection bag during installation process.
× 2
Light detection
1. Standby mode.
” button to enter Press and hold (over 2s) “
standby mode. Details refer to “Homeowner's
Guide” Page 15 “Standby mode”.
2. Stop function.
Press button to enter front wash
Press button to enter rear wash Press button to enter toilet flush
Press “ ” button to stop flush, dryer, air care,
one button sterilization, manual wand clean and
UV function.
Auxiliary button
Bidet nozzle
To Next Page
Loading...
Need help?
General
