Kohler K-527 User Manual

Water Outlets – Set the Default (K-558, K-558-E)
Program 9: Determine the default outlet(s) that will turn on at shower
start-up.
The factory default is outlet 1.
NOTE: Multiple outlets is only an option for K-558. All outlets
must be enabled (Prog 8) for multiple outlet options to appear. See
the ″Water Outlets – Set Active Outlets″ section.
Choose ″Prog 9″ from the settings menu.
Use the [Up] or [Down] icon to choose the outlet(s) that will turn
on at shower start-up; ″1″ for outlet 1, ″2″ for outlet 2, ″3″ for
outlet 3, or any combination of multiple outlets (K-558 only).
Press the [Power] icon to set.
Press the [Power] icon again to return to the settings menu.
Refer to the ″Settings Menu″ section to access other settings or
exit the menu.
Choose default outlets: outlet 1 (1),
outlet 2 (2), outlet 3 (3) or any combination.
1214635-5-A 18 Kohler Co.

Kohler K-527 Specifications

General

Brand	Kohler
Model	K-527
Category	Recording Equipment
Language	English