Sound – ON/OFF
Program 11: Turns the chime ON or OFF. The chime is associated with
icon presses and the countdown for timed showering/bath fill,
The factory default is chime ON (y).
Choose ″Prog 11″ from the settings menu.
Use the [Up] or [Down] icon to choose ″n″ to disable chime, or
″y″ to enable. Press the [Power] icon to set.
Press the [Power] icon again to return to the settings menu.
Refer to the ″Settings Menu″ section to access other settings or
exit the menu.
Troubleshooting
WARNING: Risk of electric shock. Disconnect power before
performing any maintenance. When disconnected, the
product will no longer be electrically live, which will
eliminate the risk of electric shock.
CAUTION: Risk of personal injury. The valve may contain
hot water; be careful when draining any residual water.
NOTICE: Turn OFF the power and water supply to the valve before
performing any maintenance to the valve.
It is recommended that any valve maintenance should be performed
Enable (y) or
disable (n) chime.
1214635-5-A 20 Kohler Co.
To Next Page
Loading...
Need help?
General
