What to do if my Kohler K-5402A-0 unable to open/close cover?
If you're unable to open or close the cover of your Kohler Other toilet, the seat sensor might not be detecting a user. Remove any objects or wipe the seat. Also, there may have been customer interference during a previous cover swing process. Use the remote or manually move the cover to the normal position, and avoid blocking the switch during the swing process.
What to do if my Kohler K-5402A-0 Other clean function does not operate properly?
If the clean function on your Kohler Other toilet isn't working right, first ensure there's a water supply. Check that the water supply valve is fully open. Also, make sure the toilet isn't in OFF mode by checking the switch on the terminal box. The issue could also be that the sensor isn't detecting you properly; try adjusting your sitting position. Finally, inspect the water inlet hose for sharp bends and straighten if necessary.
Why does my Kohler Other toilet not flush automatically?
If your Kohler Other toilet isn't flushing automatically, it could be due to several reasons. Check if there is a water supply and ensure that the water supply valve is open. A power failure could also be the cause, so wait until the power is restored. The product might be under protected status, so turn on the terminal box switch. Finally, the auto flush function might be off.
What to do if my Kohler K-5402A-0 Other remote unable to control toilet?
If your Kohler Other remote isn't controlling the toilet, the battery may have run out. Ensure the toilet power is on and that it is not in OFF mode by checking the switch to the terminal box. Finally, the toilet and remote may not be connected.
What to do if my Kohler Other flush function stops during operation?
If the flush function on your Kohler Other toilet stops during operation, it may be because the auto-stop function activates after 5 minutes of continuous flushing. If you need to continue flushing, press the flush button again. Also, the seat may not be detecting a user. Try adjusting your sitting position and sit again.
What to do if my Kohler K-5402A-0 dryer stops working during operation?
If the dryer on your Kohler Other toilet stops working during operation, it may be because the dryer automatically stops after 4 minutes of continuous use. If needed, press the dryer button again. Also, the seat may not be detecting a user. Try adjusting your sitting position and sit on again.
How to fix Kohler K-5402A-0 water level is wrong?
If the water level in your Kohler Other toilet is wrong, the water inlet valve float might not be adjusted properly; adjust the water level again.
Why is my Kohler Other unable open/close cover automatically?
If your Kohler Other toilet cover isn't opening or closing automatically, ensure that you enter or leave the detecting zone. Also, the remote 'auto swing' function might be OFF. Finally, the toilet might be flushing; wait until the flush process is complete.
What to do if my Kohler K-5402A-0 Other UV sterilization process stops?
If the UV sterilization process on your Kohler Other toilet stops, it could be because someone is sitting on the seat. Close the cover and reactivate UV sterilization. The seat may also be covered by an object or be wet; remove any objects and wipe the seat.
How to fix Kohler Other toilet leak?
If your Kohler Other toilet is leaking, it could be due to foreign objects blocking the water inlet valve float, preventing it from stopping the water flow. Adjust other parts to avoid contact with the float. Alternatively, there might be foreign objects on the water sealing piece; remove them.
Explains how the remote connects and stays connected to the toilet.
Describes how the toilet automatically flushes after user leaves.
Perform toilet flush using FULL or ECO buttons on remote.
General| Product Type | Toilet |
|---|---|
| Color | White |
| Material | Vitreous China |
| Installation | Floor Mounted |
| Shape | Elongated |
| Warranty | 1 Year Limited Warranty |
To Next Page