Operating fluids and maintenance Operation and Maintenance Manual
Maintenance activities
u
Mount belt (fan) 2. (For the procedure, please refer to the chapter “Check state
of fan drive belt drive, replace if necessary”.)
u
Mount fan on the fan drive 1. See the generator set’s operating manual.
5.14.9 Checking and replacing the water pump belt drive and
battery charging alternator
Damage to the V-ribbed belt includes:
– Broken ribs
– Rubber nodules in the base of the belt
– Dirt and/or stone deposits
– Ribs broken off the base of the belt
– Transverse cracks on the back
– Transverse cracks in several ribs
Fig. 66: Damage to the V-ribbed belt
The belt attachment is self-tensioning and maintenance-free.
Replacing the V-ribbed belt
Make sure that:
q
A new V-ribbed belt is on hand.
q
Another person is present.
q
Turning device ID no. 10123791 is available.
WARNING
Rotating parts!
Risk of injury! Causes serious injuries.
u
Turn the Diesel engine off.
u
Secure the engine against unexpected starting.
84
© 2017 by Kohler Co. All rights reserved.
KD27V12 33521029401_3_1 en 2017-07-01
To Next Page
Loading...
