TP-7070 7/1830 Section 2 Operation
2.8 Operator Login
Some functions require logging in as an operator.
1. Touch the Operator button. See Figure 2-12.
2. Use the virtual keypad to enter the login (1966).
Note: When logging on as operator 1966, a
password is not required.
When logged in as an Operator, the Modify button
appears on screens where settings can be changed.
See Figure 2-11 for an example.
The operator is automatically logged out after
10 minutes.
1
1. Modify button
Figure 2-11 Modify Button
3
1. Operator button
2. Virtual keypad
3. Login (1966)
1
2
Figure 2-12 Operator Login
To Next Page
Loading...
