14
Battery Test Cancel Battery Test
➢ Audio mute
It will show “Mute all” if the audio is active. Touch “Yes” to activate mute. If “Mute all” is active, it will
show icon on the top left corner of the main screen. Touch “Back” to return to CONTROL screen
immediately or “No” to cancel this operation and back to CONTROL screen.
It will show “Cancel mute” if the UPS is mute already. Touch “Yes” activate audio function or “No” to
keep mute. Touch “Back” to return to CONTRL screen.
Mute All Cancel Mute all
➢ On/Off Charger
It will show “Turn on Charger?” when charger is off.
It will show “Turn off Charger?” when charger is on.
Touch “YES” to turn on or off the charger. Then, the screen will return to main screen.
Touch “Back” to return to CONTROL screen immediately or “No” to cancel this operation and back to
CONTROL screen.
TURN ON CHARGER TURN OFF CHARGER
➢ EXIT PARALLEL
In the case of multiple machines in parallel, clicking this option will pop up the “Exit Parallel?”
interface;
Click "Yes" to exit the machine from the current parallel system;
Click "No" to cancel this operation and return to the operation interface.
In the case of a single machine, clicking this option will pop up the "This mode can’t be SETUP!".
To Next Page
Loading...