Kohler PowerWAVE 3000/P1

26
3-2-6. Data Log screen
Touch the icon to enter date log page. Data log is used to record the warning and fault information
of the UPS. The record contains date & time, code, type and description. Touch the icon or
to page up or down if there are more than one page in the date log. Touch the icon to return to
main screen. Press the icon to go back to main menu. Please refer to Section 3-6 and 3-7 for warning
and fault code list.
Data Log Page
3-3. Audible Alarm
Description
Buzzer status
Muted
UPS status
Bypass mode
Beeping once every 2 minutes
Yes
Battery mode
Beeping once every 4 seconds
Fault mode
Beeping continuously
Warning
Overload
Beeping twice every second
No
Others
Beeping once every second
Fault
All
Beeping continuously
Yes