25
➢ ECO Mode: Enable/disable ECO function.
Parameter Information Page 1
Parameter Information
➢ Line Voltage Range: The acceptable line input voltage range.
➢ Line FRE Range: The acceptable line input frequency range.
➢ Bypass Voltage Range: The acceptable input voltage range for bypass mode.
➢ Bypass FRE Range: The acceptable input frequency range for bypass mode.
➢ ECO Voltage Range: The acceptable input voltage range for ECO mode.
➢ ECO FRE Range: The acceptable input frequency range for ECO mode.
Parameter Information Page 2
➢ BATT Mode Work Time: The maximum discharge time in battery mode.
➢ BATT Warning Voltage:
◼ HIGH: High battery warning voltage.
◼ LOW: Low battery warning voltage.
➢ Shutdown Voltage: If battery voltage is lower this point, UPS will automatically shut down.
➢ Shutdown Delay: UPS will shut down in setting minutes. The countdown will start after confirming the
pop-up screen.
➢ Restore Delay: UPS will automatically restart in setting minutes after the UPS shuts down.
➢ Battery Number: Display’s battery number quantity.
To Next Page
Loading...