24
Basic Information
➢ MCU Version: MCU version.
➢ DSP Version: DSP version.
➢ Serial NO.: The serial number of UPS.
➢ Manufacturer: The information about manufacturer.
➢ Service Contact: The contact name is set in “Basic Setting”.
➢ Service Phone: The listed numbers are set in “Basic Setting”.
➢ Service Mail: The service email account is set in “Basic Setting”.
Basic Information Page2
➢ PAR State: The information of parallel state.
➢ PAR ID: The UPS ID number in parallel state.
Rated Information Page
Rated Information
➢ Output Voltage: It shows output rated voltage.
➢ Output FRE: It shows output rated frequency.
➢ CVCF Mode: Enable/Disable CVCF mode.
➢ Bypass Forbid: Enable/disable bypass function.
➢ Bypass UPS Off: Enable/disable auto bypass function when UPS is off.
➢ Auto Restart: Enable/disable auto-restart function.
To Next Page
Loading...