KohlerPower.com31 33 590 03
3. Remove the oil filler cap.
3 Oil filler cap
4 O-ring
7DK-033
0˚C
å
Kohler 10W-30
∂
SAE 10W
ç
SAE #20
∫
SAE #30
32˚F
25˚C
80˚F
4. Place an oil pan under the engine. Tilt the genera-
tor to drain the oil completely.
5. Check the oil filler cap and O-ring. Replace them
if damaged.
6. Place the generator on a level surface.
7. Add engine oil to the correct level.
NOTICE
9 Do not tilt the generator when adding engine
oil. This could result in overfilling and damage
to the engine.
9 Be sure no foreign material enters the crank-
case.
5 Correct level
8. Wipe the cover clean, and wipe up any spilled oil.
Recommended engine oil:
å Kohler 10W-30,
SAE 10W-30 or 10W-40
∫
SAE #30
ç
SAE #20
∂
SAE 10W
Recommended engine oil grade:
API Service SE type or higher
Engine oil quantity:
0.4 L (0.42 US qt, 0.35 Imp qt)
7PB-F8199-L2.indd 31 2014/01/08 17:07:37
To Next Page
Loading...
