Kohler PRO 7.5 Service Manual

Specifi cations
4 37 690 01 Rev. --KohlerPower.com
TORQUE SPECIFICATIONS
3
Alternator Front Cover 53.5 N·m (474 in. lb.)
Alternator Rear Cover 4.5 N·m (40 in. lb.)
AVR and Brush Assembly 4.0 N·m (35 in. lb.)
Battery Mounting Bracket
M6 Screws
M8 Screws
9.9 N·m (87 in. lb.)
25.0 N·m (221 in. lb.)
Carbon Canister Mounting Bracket 9.9 N·m (87 in. lb.)
Control Panel Back Cover 5.8 N·m (51 in. lb.)
Control Panel Electrical Components
M3 Screws
M4 Screws
1.3 N·m (11 in. lb.)
2.9 N·m (26 in. lb.)
Control Panel 9.9 N·m (87 in. lb.)
Engine/Alternator Isolators 18.3 N·m (162 in. lb.)
Frame Assembly
M6 Screws
M10 Screws
11.5 N·m (102 in. lb.)
30.0 N·m (266 in. lb.)
Fuel Tank Mounting 9.9 N·m (87 in. lb.)
Muffl er Assembly
M8 Screws
M10 Screws
25.0 N·m (221 in. lb.)
32.5 N·m (288 in. lb.)
Muffl er Cover Assembly
9.9 N·m (87 in. lb.)
Rotor Assembly
22.0 N·m (195 in. lb.)
Stator Assembly
10.4 N·m (92 in. lb.)
Wire Connector
2.5 N·m (22 in. lb.)
3
Values are in Metric units. Values in parentheses are English equivalents.

Kohler PRO 7.5 Specifications

General

Brand	Kohler
Model	PRO 7.5
Category	Portable Generator
Language	English