10
GETTING STARTED
Charging The Battery
IMPORTANT NOTE: Fully charge the pool vacuum (about 6 hrs) before using
it for the first time.
WARNING!
KEEP YOUR FINGERS AWAY FROM THE OPENIN
G TO AVOID BEING
HIT BY THE IM
PELLER WHEN IT’S ON.
Use only the original external adaptor and charging cabl
e provided.
Make sure the pool vacuum and the charging port are cl
ean and dry before
set-up and charging. (TIPS: use a cotton bud to dry the charging port and
charging pins)
The charging pins are waterproof. However, remnants of water in the port
and around the pins coul
d result in natural
occurrence of stains (a
byproduct of chemical reaction between water and elec
tric currents).
Otherwise, the stains can be removed by light scrubbing with a cotton bud
soaked with jui
c
e of lemon or vinegar.
1.
Place the unit on a flat surface. Se
t the pool vacuum to Power Off/
Charging Mode by turning the switching knob anticl
ockwise until it clic
ks
and com
pletely
exposes the charging port.
2.
Align and attach the charging cable to the charging port. WARNING! Be
sure not to invert the chargi
ng cabl
e and ensure both the charging cable
and charging port are clean and dry before charging them. TIPS: Use
cotton bud to dry the charging port and pins. Connect the external
adaptor’s cable plug to the charging cable’s port.
To Next Page
Loading...
