Kokido EV40 - SAFETY WARNINGS & INSTRUCTIONS

7
SAFETY WARNINGS & INSTRUCTIONS
Information contained in this Instruction Manual will help you operate the item safely,
protect yourself and others from hazards, and prevent damage to the device and other
property.
SAVE THESE INSTRUCTIONS
WARNING!
- This is not a TOY. Children should be kept out of reach from this pool
vacuum and its accessories.
-
Never allo
w children to operate this product.
-
This appliance is not intended for us
e by persons with reduced physical,
sensory, mental capabili
ties, or a la
ck of experience and knowledge,
unless they are given supervision or instructions concerning the safe use
of the appliance and understand the hazards involved by a person
responsible for their safety.
- Children must not play with this product.
-
Cleaning and user maintenance must not be carried out by chil
dren.
-
Make sure the pool vacuum is fully immersed in water before initiating
operation. The minimum water level required to operate the pool vacuum
must cover the entire pool vacuum. Operating the pool vacuum when i
t
is not immersed in the water correctly could damage the unit and void the
warranty as a resul
t.
-
Maximum operating depth in water is 3 meters (9.8 ft.).
- Operating water temperature: 5˚C (41˚F) –35˚C (95˚
F).
- Detachable suppl
y
unit (external adaptor).
-
The pool vacuum is only to be recharged wi
th external adaptor and
charging cable deli
v
ered with this product.
-
For the purposes of recharging the battery, only use the detachable
suppl
y unit (external adaptor
model number: DSS12D-0841000-B /
DSS12D-0841000-C / DSS12D-0841000-D/ LX084100U) that provided
with this pool vacuum to charge the battery.
-
Connect the external adaptor to a power source through a resi
dential
current device (RCD) / a ground fault circuit interrupter (GFCI). If in doubt,
consult a qualifi
ed professional electric
ian.
-
Do not use this pool vacuum
if any damage is detected.
-
Replace damaged parts with ones that are certified by the distri
butor or
manufacturer.
-
Turn off the power, disconnect the external adaptor from the power
source, and unplug the external adaptor from the charging cable before
detaching the pool vacuum
from the charging cable.
-
Disconnect the pool vacuum from the suppl
y mains and make sure the
pool
vacuum is powered OFF prior to servicing it such as cleani
ng the
filter bag.
-
Do not attempt to replace the installed rechargeable Li-ion bat
tery pack.
-
DO NOT handle the pool vacuum, ex
ternal adaptor and charging cable