To Next Page

To Previous Page

To Adjust Fan Speeds:

To select the speed of the fan, press the Fan Speed button which cycles through four (4) steps:

Auto, Low, Medium, and High. Each time the button is pressed the fan speed mode is shifted to

the next speed option.

To Select Operating Mode:

To choose the operating mode, press the Mode button. Each time you press the button, a mode

is selected in a sequence that cycles from Auto -> Cool -> Energy Saver -> Fan Only -> Dry. The

indicator light beside the mode button will be illuminated and remain on once the mode is

selected.

To Operate in Auto Mode:

 When you set the unit to “Auto” mode the unit will automatically select cooling or fan

only operation: Whichever will reach and maintain the default cooling temperature

setting of 68°F.

 When the ambient room temperature is above 68°F, the unit will turn on the compressor

to begin cooling. Once this temperature is achieved, the unit will then switch to fan only

mode in order to maintain this temperate. This process will repeat, as necessary.

 In this mode, the set temperature cannot be adjusted. It will start automatically at a

speed calibrated to the actual room temperature.

To Operate in Cool Mode:

 When the unit is set to “Cool” mode it will cool the room to maintain the desired set

temperature.

 When the desired temperature has been reached, the unit will automatically maintain the

temperature.

 Press the Right and Left buttons to adjust the desired temperature and press the Fan

Speed button to adjust the fan speed.

To Operate in Energy Saver Mode:

 In this mode, the air conditioner will attempt to save energy by cooling less frequently

while still trying to maintain the desired set temperature.

 The Fan Speed can still be adjusted.

Note:

 The unit does not constantly take temperature readings. The unit will take a temperature

reading periodically while operating in AUTO mode, or immediately upon adjustment of the

desired set temperature.

 When operating in AUTO MODE the unit may not switch between Cooling and Fan Mode at the

exact moment when a temperature change has occurred.

 Room temperature may be different than the temperature sensed in front of the air conditioner.

NOTE: While in “Dry” mode, the fan speed is automatically set to Low and cannot be adjusted.

Koldfront CAC8000W User Manual

Questions and Answers: