EasyManua.ls Logo

Koldfront WAC8001W - Parts Identification; Unit Views and Labels

Koldfront WAC8001W
10 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Note: Check that the air conditioner cabinet is tilted back about 1⅛” to 1½”, which should be
about 3-4 degrees downward to the outside. With proper installation any excessive condensation
buildup that is not dispersed by the fan blade onto the condenser coils will drain over the rear
edge of the cabinet fame.
Installing Unit into Window
Follow the steps listed below to install the air conditioner into the window.
1. Center the air conditioner cabinet into the window:
Check that the lower rail of the air conditioner cabinet is behind and against the back side
of the window sill.
Maintain a firm hold on the cabinet and lower the window sash to hold the cabinet in place.
Measure the distance of the right side and left, and adjust until the unit is perfectly
centered.
Note: When choosing your window make sure the power supply cord is within 4 feet of a
grounded 3-prong outlet.

Other manuals for Koldfront WAC8001W

Related product manuals