EasyManua.ls Logo

Koldfront WAC8001W - User Manual

Koldfront WAC8001W
23 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
V2.2-06232017
Window Air Conditioner
with Supplemental Heater
Owner’s Manual
For more information on other great EdgeStar products on the web, go to
http://www.edgestar.com
To use the EdgeStar self-diagnostic tool, go to
https://support.edgestar.com
WAC8001W / WAC12001W

Table of Contents

Other manuals for Koldfront WAC8001W

Preview: Service Manual
Service Manual31 pages
Preview: Installation Instructions
Installation Instructions10 pages

Questions and Answers

  • L
    Lauren ChapmanAug 20, 2025
    Why doesn't the air from my Koldfront WAC8001W Air Conditioner feel cold enough?
    • M
      Michelle MooneyAug 20, 2025
      If the air from your Koldfront Air Conditioner doesn't feel cold enough, it could be because the room temperature is below 17°C (62°F); cooling might not occur until the room warms up. Another possibility is that the temperature sensing element is touching the cold coil. Straighten the tube away from the coil. Also, if you recently changed modes, the compressor might have shut off; wait approximately 3 minutes for it to restart in COOL mode.
  • O
    oriveraAug 22, 2025
    Why is my Koldfront WAC8001W Air Conditioner making the room too cold?
    • P
      phillipcooleyAug 22, 2025
      If the room is too cold when using your Koldfront Air Conditioner, the temperature might be set too low. Try increasing the set temperature.
  • M
    marythorntonAug 25, 2025
    What to do if Koldfront WAC8001W is cooling but room is too warm?
    • F
      fboydAug 25, 2025
      If your Koldfront Air Conditioner is cooling, but the room is too warm and there's no ice forming on the cooling coil, start by cleaning the air filter, as a dirty filter restricts airflow. Ensure that the temperature isn't set too high; adjust it to a lower setting. Check the air directional louvers and position them properly for better air distribution. Also, make sure that the front of the unit isn't blocked by drapes, blinds, furniture, or anything else that could restrict air distribution.
  • A
    Angela WaltonAug 26, 2025
    Why Koldfront WAC8001W is cooling but room is too warm and ice is forming?
    • D
      Debbie BarnesAug 26, 2025
      If your Koldfront Air Conditioner is cooling but the room is too warm, and ice is forming on the cooling coil behind the decorative front, try setting it to FAN ONLY mode to defrost the coil, especially if the outdoor temperature is below 18°C (64°F). Clean the air filter, referring to the maintenance section. Also, if the thermostat is set too cold for night-time cooling, set it to FAN ONLY mode to defrost the coil and then set the temperature to a higher setting.
  • R
    ricepamelaAug 28, 2025
    Why Koldfront Air Conditioner air from unit does not feel cold enough?
    • J
      Jennifer RobertsAug 28, 2025
      If the air from your Koldfront Air Conditioner doesn't feel cold enough, it could be because the room temperature is below 17°C (62°F); cooling may not occur until the room temperature rises above this level. Another cause could be the temperature sensing element touching the cold coil behind the air filter; straighten the tube away from the coil. Also, the compressor might have shut off due to changing modes; wait approximately 3 minutes and listen for the compressor to restart when set in the COOL mode.
  • C
    Carlos GoldenAug 29, 2025
    How to troubleshoot a Koldfront WAC8001W Air Conditioner that is not turning on?
    • J
      james65Aug 30, 2025
      If your Koldfront Air Conditioner isn't working, there are several possible reasons. First, ensure the unit is properly plugged into the wall. If it is, check the LCDI power cord and press the Reset button. Also, inspect your house fuse or circuit breaker; replace the fuse or reset the breaker if necessary. Make sure the control panel is turned ON and set to your desired settings. Finally, try moving the unit to another outlet and check the circuit breaker, as insufficient power could be the issue.
  • R
    Rebecca HuertaAug 31, 2025
    What to do if Koldfront WAC8001W is cooling but the room is too warm (no ice forming)?
    • A
      Amy PorterSep 1, 2025
      If your Koldfront Air Conditioner is cooling, but the room remains too warm and no ice is forming, the air filter might be dirty and restricting airflow. Clean the air filter to resolve this. Also, ensure the temperature isn't set too high; try setting it to a lower temperature.
  • E
    Eric WolfSep 2, 2025
    Why is my Koldfront Air Conditioner cooling but the room is too warm and ice is forming?
    • M
      Malik PetersonSep 2, 2025
      If your Koldfront Air Conditioner is cooling, but the room is too warm and ice is forming on the cooling coil, the outdoor temperature may be below 18°C (64°F). Set the unit to FAN ONLY mode to defrost the coil. Also, a dirty air filter can cause this issue, so clean the filter and then defrost the unit by setting it to FAN ONLY mode. If the thermostat is set too cold for night-time cooling, defrost the coil by setting the unit to FAN ONLY mode and then set the temperature to a higher setting.
  • N
    Nicholas WalkerSep 4, 2025
    Why does my Koldfront WAC8001W turn on and off rapidly?
    • R
      Ryan WoodSep 4, 2025
      If your Koldfront Air Conditioner is turning on and off rapidly, the air filter might be dirty and restricting airflow; cleaning the air filter should help. Alternatively, if the outside temperature is extremely hot, setting the FAN speed to a higher setting can help bring air past the cooling coils more frequently.
  • J
    jonathan30Sep 6, 2025
    What to do if the Koldfront WAC8001W remote control is not sensing?
    • K
      Karen EdwardsSep 6, 2025
      If the remote control isn't working with your Koldfront Air Conditioner, make sure it's within 20 feet and a 180-degree radius of the unit's front. Also, check for and remove any obstructions blocking the remote control signal.

Summary

Important Safety Information

Electrical Safety Precautions

Safety guidelines related to electrical connections and handling.

General Safety Precautions

Overall safety guidelines for operating the air conditioner.

Operation of Safety Plug

LCDI Plug Testing and Use

Instructions for testing and correctly using the LCDI safety plug.

Introduction

For Your Records

Section for recording unit details for warranty and future reference.

Parts Identification

Unit Views and Labels

Identification of key components through side and front views.

Preparations for Installation

Installation Tools and Parts

Lists required tools and supplied parts for the installation process.

Window Installation Instructions

Prepare Unit for Window Mounting

Steps to remove the unit from its cabinet and attach initial components.

Attach Top Channel and Side Curtains

Instructions for attaching the top channel and side curtains to the unit.

Window Installation Instructions

Attach Foam Adhesive Seal

Guide to applying foam adhesive for optimal unit performance and sealing.

Installing Cabinet into Window

Securing Cabinet in Window Frame

Methods for securing the air conditioner cabinet in wooden and vinyl window frames.

Installing Cabinet into Window

Attach Side Curtains to Window Frame

Detailed steps for attaching the side curtains to the window frame for a proper seal.

Completing Installation

Final Installation and Power-Up

Final steps to complete installation, including securing the window and powering the unit.

Control Panel Operations

Control Panel Overview

Explanation of the control panel buttons and basic functions like power and temperature.

Adjusting Temperature and Fan Speed

How to change the temperature settings and fan speeds using the control panel.

Control Panel Operations

Selecting Operating Modes

Guide to choosing and using different modes like Auto, Cool, Dry, Heat, and Fan.

Using Auto, Fan, and Dry Modes

Specific instructions for operating the unit in Auto, Fan Only, and Dry modes.

Energy Saver Feature Usage

How to activate and utilize the Energy Saver feature for reduced power consumption.

Control Panel Operations

Sleep and Timer Functions

Instructions for using the Sleep mode and setting Auto Start/Stop timers.

Filter Indicator and Error Codes

Understanding the Check Filter light and interpreting error codes for troubleshooting.

Air Directional Louvers

Additional Operating Tips

Remote Control Operations

Maintenance Procedures

Air Filter Cleaning Guide

Step-by-step instructions for cleaning the air filter.

Cabinet Cleaning Instructions

Normal Operational Sounds

Energy Saving Guide

Troubleshooting Common Issues

Product Specifications

EdgeStar Limited Warranty

Warranty Coverage Details

Information on what parts and labor are covered by the warranty.

Warranty Exclusions and Limitations

Details of what is not covered by the warranty agreement.

How to Obtain Warranty Service

Instructions for contacting customer support and initiating a warranty claim.

Koldfront WAC8001W Specifications

General IconGeneral
TypeWindow Air Conditioner
Cooling Capacity8000 BTU
Voltage115V
Noise Level52 dB
Coverage Area350 sq. ft.
Fan Speeds3
DehumidificationYes
Control TypeMechanical
Remote ControlNo
Filter TypeWashable
Window Width (min)23 inches
Window Width (max)36 inches
Operating Frequency60 Hz
Dehumidification Capacity2.3 pints/hour
Thermostat ControlYes
Window Kit IncludedYes
Operating ModesCool, Fan
Timer24-hour
Dimensions (H x W x D)14.5 x 16.5 x 12 inches

Related product manuals