260 NORTH ELM STREET • WESTFIELD, MA 01085 • Tel: (413) 564-5520 • Fax: (413) 564-5815
KKSM-3
GENERAL INFORMATION AND
CAPACITY SELECTION..................................... 1, 2
SPECIFICATIONS .................................................. 3
STANDARD AND OPTIONAL FEATURES ........ 4, 5
INSTALLATION INSTRUCTIONS ...................... 6, 7
CHECKOUT OF UNIT OPERATION ...................... 7
WATER FLOW GRAPH AND
MODES OF OPERATION ................................... 8, 9
UNIT CONSTRUCTION................................... 10-12
PARTS REPLACEMENT PROCEDURE........ 13, 14
PREVENTIVE MAINTENANCE...................... 14, 15
TROUBLESHOOTING GUIDE ....................... 16, 17
PIPING SCHEMATICS ......................................... 18
WIRING DIAGRAMS ...................................... 19, 20
CERTIFIED DRAWINGS ...................................... 21
LIMITED WARRANTY .......................................... 22
PARTS LIST..................................................... 23,24
KOMPAC
SERIES
AIR CONDITIONER
AND HEAT PUMP
INSTALLATION &
OPERATION
MANUAL
Koolette 7,000 Btu/Hr Cooling
7,800 Btu/Hr Heating
Kompac 9,400-16,000 Btu/Hr Cooling
10,900-17,900 Btu/Hr Heating
King Kompac 20,500-26,000 Btu/Hr Cooling
24,000-31,000 Btu/Hr Heating
GENERAL INFORMATION
DESCRIPTION
Kompac Series Air Conditioners and Heat Pumps are
designed for applications where outside air is not
available and spot cooling is required. The cord
connected Kompac Models range from a 7,000 Btu/Hr
countertop to a 26,000 Btu/Hr floor mount configuration
to meet any space requirements. Kompac and King
Kompac models are provided with casters for portability.
All Models are completely self-contained with the entire
refrigeration system, fan motor, water valve, and
electrical components housed in a metal cabinet with a
baked enamel finish. Only power and condenser water
supply, water discharge, and condensate drain piping
are required for installation. With the heat pump option,
automatic changeover from cooling to heating to cooling
provides the desired comfort, depending upon
thermostat command.
The water-cooled condenser requires only that amount
of water needed to achieve the desired high and low
refrigeration system pressures. The condenser water
flow rate for any entering water temperature can be
obtained using the graph on page 8. Condenser water is
regulated by a refrigeration system head pressure
actuated water regulating valve.
KOOLETTE
KOMPAC
KING KOMPAC
To Next Page
Need help?
General