To Next Page

To Previous Page

I.5 Equipment description

I.5.1 The digifas™ 7200 series of digital servo amplifiers

The digifas™ 7200 series of digital servo amplifiers are available in several versions:

Standard version digifas™ 72xx series

4 current types, with analog speed-setpoint input, incremental positional output,

controllable motor-holding brake. In this standard version there is no position

control capability in the servo amplifier. This function must be taken over by the

automation equipment.

Options* : -IL-, -BV-

BIT CONNECT version digifas™ 72xx-SPS series

PLC interface, connection to a simple control via 10 I/O leads, controllable motor-

holding brake. Execution of the motion data sets which are stored in the servo

amplifier, 4 current types, digital setpoint input from the automation equipment,

positional control in the servo amplifier.

Option* : -BV-

PULSE CONNECT version digifas™ 72xx-STEP series

Pulse-direction interface, connection to a stepper-motor controller or as a slave-

controller to a digifas™ 7200 master-controller with incremental position control,

4 current types, controllable motor-holding brake, digital setpoint input from the

automation equipment, positional control (cascade control) in the servo amplifier.

Option* : -BV-

PROFIBUS CONNECT version digifas™ 72xx-L2/DP series

Connection to PROFIBUS-DP (SINEC-L2-DP), 4 current types, digital setpoint

input from the automation equipment, positional control in the servo amplifier,

controllable motor-holding brake.

Option* : -BV-

CAN CONNECT version, digifas™ 72xx-CAN series

Connection to CAN BUS, 4 current types, digital setpoint input from

the automation equipment, positional control in the servo amplifier, controllable

motor-holding brake.

Option* : -BV-

Further explanation of the CONNECT versions can be found in the corresponding

Installation and Operating Instructions for the CONNECT module.

* Options : -IL- controllable torque limiting, external accessory unit, see Chapter IV.4

-BV- forced ventilation for digifas™ 7206 with ballast power > 75W

Chapter I General PageI-3

digifas

7200 series 03.98

Kollmorgen Seidel digifas 7200 series User Manual

Other manuals for Kollmorgen Seidel digifas 7200 series