SEN03766-02 00 Index and foreword
30
PC130-8
Type 2
1. Disconnection
1) Hold the tightening portion and push body
(7
) straight until sliding prevention ring (6)
contacts contact surface (a) of the hexag-
onal portion at the male end. (Fig. 6)
2) While holding the condition of Step 1), turn
l
e
ver (8) to the right (clockwise). (Fig. 7)
3) While holding the condition of Steps 1)
and 2)
, pull out whole body (7) to discon-
nect it. (Fig. 8)
2. Connection
q
Hold the tightening portion and push body
(7) straight until sliding prevention ring (6)
contacts contact surface (a) of the hexag-
onal portion at the male end. (Fig. 9)
To Next Page