UNDERCARRIAGE FRONT CROSSBAR
14 - 68
7. On each side of machine, attach lifting sling and hoist to front crossbar.
8. On each side of machine, remove retaining ring (1) and ring retainer (2)
from mounting pin.
9. On each side of machine, drive out mounting pin.
10. Lower crossbar and remove from machine.
INSTALLATION
1. Position crossbar (1) into machine. Coat mounting pins (2) with "Never
Seez" and install with rear ring retainer and retaining ring on each side
of machine.
To Next Page
Loading...
Need help?
General
