12. OPERATION
1.
2.
3.
Pull the fuel control lever to the high idle position.
Pull the blade control lever (A) rearward to raise the blade 360 to 508
mm (15 to 20 in) off the ground.
If equipped, pull the ripper control lever (B) rearward to raise the ripper
360 to 508 mm (15 to 20 in) off the ground.
Depress the brake and decelerator pedal (A) and this will release the
brake lock (B).
2A 2B
4. Move the safety lock lever to up (unlock) position.
2-38
To Next Page
Loading...
