Komatsu D39E-1 - Location of Plates, Table to Enter P.I.n. and Distributor; Plate Location

4. LOCATION OF PLATES. TABLE TO ENTER P.I.N. AND DISTRIBUTOR
4.1 P.I.N. PLATE LOCATION
The product identification number (PIN) is stamped on a plate attached
to the left hand side of the seat support below transmission control. It is
also stamped into the right rear top of the rear main frame
4.2 ENGINE SERIAL NO. PLATE LOCATION
The engine serial number is stamped in a plate on the left side of the
engine front gear cover above the fuel pump.
4.3 TABLE TO ENTER NUMBERS AND DISTRIBUTOR
I
Machine P.I.N.:
I
Engine Serial No.:
Distributor Name:
Address: Phone:
Service personnel for your machine:
REMARKS
O-4