11.
On
the main window, press “iB logo key” and display the
main menu.
12.
On “File” menu, press “Active” and “Surface” in order, and
select.
13.
Select a surface to be set as the current work from the sur-
faces list.
The screen returns to the main window.
METHOD FOR CREATING FLAT SURFACE FILES
When creating the flat plane surface, perform the following procedure.
1.
On the main window, press “iB logo key” and display the
main menu.
2.
On “File” menu, press “Surfaces...” and select.
3.
On “Project Surfaces” screen, press “New...”.
HANDLE CONTROL BOX FILE MENU
4-21
To Next Page
Loading...
