1.
Press
power supply ON switch (green) (1) to turn on the
power supply of the control box.
2.
Insert USB memory (2) in which project files are saved into
USB port (3) of the control box.
3.
On the main window, press “iB logo key” and display the
main menu.
4.
On “File” menu, press “Projects...” and select.
5.
On “Project Files” screen, press “Copy...”.
6.
On “Copy files” screen, select “D: to 3DMC folder”.
7.
Select a project file to be imported to the internal memory
of the control box, and press
“Ok”.
The selected project file is imported into the internal mem-
ory of the control box.
METHOD FOR CREATING A PROJECT FILE
When creating multiple project files, perform the following procedure.
FILE MENU HANDLE CONTROL BOX
4-10
To Next Page
Loading...
