2.
Input a value by pressing the numeric keyboard.
(1) “Ok” button
(2) Numeric keys
(3) Backspace key
(4) “Cancel”
button
3.
After inputting, press “Ok”.
The input information becomes effective and the numeric
keyboard goes out.
You can also change the value by pressing “Set” and then
pressing the up and down arrow keys.
METHOD FOR DISPLAYING MAIN MENU
On the main window, press “iB logo key”.
The main menu (“File”, “Control”, “Tools”, and “View”) is dis-
played.
HANDLE CONTROL BOX INTRODUCTION
4-7
To Next Page
Loading...
