12. OPERATION
5. Lock gear shift lever @ with safety lever 0.
6. Lower the blade to the ground with blade control lever 8.
7. Lock blade control lever @ with safety lever 0.
REMARK
For details of the method of stopping the engine, see “12.13
STOPPING ENGINE”.
12.12 CHECK AFTER FINISHING WORK
1. Use the meters and lamps to check the engine water tempera-
ture 0, torque converter oil temperature 0, engine oil pressure
warning lamp 0, charge lamp 0, and dust indicator @.
AE080210
/’ 1 AE080330
2-37
To Next Page