Komatsu D58E-1 - Use of Fuel, Coolant and Lubricants According to Ambient Temperature

20. USE OF FUEL, COOLANT AND LUBRICANTS
ACCORDING TO AMBIENT TEMPERATURE
20.1 FUEL, OIL
Select the fuel and oil from the table below according to the ambient temperature.
The specified capacity is the total amount of oil, including the oil in the piping of the various
components. The refill capacity is the amount of oil added when changing the oil during inspection and
maintenance.
When starting the engine in an ambient temperature of lower than O”C, always use SAEIOW,
SAEIOW-30 or SAE15W-40, even if the temperature goes up to 10°C during the daytime.
20.2 COOLANT
Use tap water for the coolant. If the only available water is river water or well water, please contact
your Komatsu distributor for advice.
When changing the coolant, adjust the density according to the ambient temperature at the place
of operation. For details, see “24.2 WHEN REQUIRED”.
PROPER SELECTION OF FUEL, COOLANT AND LUBRICANTS
T
KIND OF
FLUID
AMBIENT TEMPERATURE
-4 14 32 50 68
86°F
-20 -10 0 10 20
3O’C
CAPACITY
RESERVOIR
Specified Refill
30 e
7.93 US gal
6.60 UK gal
26 e
6.87 US gal
5.72 UK gal
Engine oil pan
63 Q
16.64 US gal
13.86 UK gal
>58E-1, -IA: 13&
3.43 US aal
2.86 UK ial
D58E-IB: 14 e
3.70 US gal
3.08 UK gal
D58P-1: 14.5 f
3.83 US gal
3.19 UK gal
34 e
8.98 US gal
7.48 UK gal
581
15.32 US gal
12.76 UK gal
13e
3.43 US gal
2.86 UK gal
14 e
3.70 US gal
3.08 UK gal
14.5 e
3.83 US gal
3.19 UK aal
34 e -
8.98 US gal
7.48 UK gal
Steering clutch case
(incl. bevel gear case)
Final drive case (each)
Engine oil
Transmission case
(incl. torque converter
case)
Damper case
1.3 e
0.34 US gal
0.29 UK gal
1.3 e
0.34 US gal
0.29 UK gal
92 e
24.31 US gal
20.24 UK gal
65 i?
17.17 US gal
14.30 UK gal
Hydraulic system
250 e
66 US gal
55 UK gal
Diesel fuel
Fuel tank
Cooling system
57 e
15.06 US gal
12.54 UK gal
Water
Idd antifreeze
% ASTM D975 No. 1
3-10