2-60
PC210/240-ENG
2. Turn fuel control dial c towards the full speed (MAX) position to in-
crease the engine speed.
3. Set safety lock lever d in the FREE position, fold the work equip-
ment, and raise it 40 - 50 cm (16 to 20 in) from the ground.
4. Operate right and left travel levers e or right and left travel pedals f
as follows.
• When the sprocket is at the rear of the machine
Pull levers e backward slowly or depress the rear part of pedals f
slowly to move the machine off.
• When the sprocket is at the front of the machine
Push levers e forward slowly or depress the front part of pedals f
slowly to move the machine off.
12. OPERATION
To Next Page