2-96
PC210/240-ENG
Disconnecting the booster cables
After the engine has started, disconnect the booster cables in the
reverse of the order in which they were connected.
1. Remove one clip of booster cable B from the engine block of the
problem machine.
2. Remove the other clip of booster cable B from the negative (-) termi-
nal of the normal machine.
3. Remove one clip of booster cable A from the positive (+) terminal of
the normal machine.
4. Remove the other clip of booster cable A from the positive (+) termi-
nal of the problem machine.
16. TROUBLESHOOTING
To Next Page
Loading...
