ANSWERING CALLS
A ring tone is heard and the blue LEDs start ashing.
Press to answer.
The LEDs show a steady blue light. The duration of the call is shown on the display screen.
MAKING CALLS
Dial the number.
Press .
The number is called and the LEDs show a steady blue light. The duration of the call is shown
on the display screen.
Redialling
Press an arrow button or .
The last number that you dialled appears on the display screen.
Use the arrow buttons to look through previously dialled numbers.
Press .
The number you select is dialled.
You can also call via the telephone’s call lists, where, as well as outgoing numbers, you
can also nd incoming calls and missed calls.
Select MENU > CALL LIST.
Select OUTGOING, INCOMING or MISSED, select a number from the list and press
.
The selected number is called.
Calling from the phonebook
Please turn to page 17 for instructions on adding and updating contacts in the phone-
book.
Press and hold down a number button for two seconds.
The phonebook appears on the display screen. The pre-programmed names appear in alphabeti-
cal order, starting with the number button’s rst letter.
Use the arrow buttons to look through the phonebook.
Press .
The contact you select is dialled.
MAKING MULTI-PARTY CALLS
Read about how to make multi-party calls using Konftel 300M under CONFERENCE
GUIDE on page 13.
ANSWERING AND MAKING CALLS
To Next Page
Loading...
