Maintenance
20221016C 39
6 MAINTENANCE
6.1 AP51 Remote Control
Under normal use, the AP51 Remote Control will require little
maintenance.
If the unit requires any form of cleaning, use fresh water and a
mild soap solution (not a detergent). It is important to avoid
using chemical cleaners and hydrocarbons such as diesel, petrol,
etc.
Make sure that all open Robnet connectors are fitted with a
protection cap.
It is advisable at the start of each season to check the Robnet
connectors and cover with Vaseline or WD40.
6.2 Exchange of software program
Figure 6-1 AP51 PCB, component layout
AP51 Remote Control PROM
To Next Page