Kongsberg Simrad ST90 - Page 29

442728/B
29
Procedure
1MakesurethattheST90userinterfaceisfullyoperational.
aMakesurethatthevisualpresentationprovidedbytheST90systemisshown
withadequatequality.
Ifnecessary:Adjustthedisplayand/orrelatedpropertiesintheProcessorUnit
operatingsystem.
bMakesurethattheOperatingPanelisfunctional.
Pressand/orturneachbutton,andmakesurethatthecorrespondingfunctionis
activatedintheuserinterface.
cMakesurethatthemenusystemisoperational.
Makerandomselections,andmakesurethattherelevantsub-menus,functions
ordialogboxesareactivated.
dMakesurethattherelevantviewsareoperational.
Movethecursortotheviewsinthemainpartofdisplaypresentation.Clickinside
oneoftheviews.Makesurethattheviewisactivated,andthatrelevantchanges
aremadeinanydynamicmenus.
eIfrelevant:Connectacomputermouse(orotherpointingdevice)totheProcessor
Unit.
MakesurethatthecomputermouseworksintheST90userinterface.Make
randomselections,andmakesurethattherelevantsub-menus,functionsordialog
boxesareactivated.
fIfrelevant:ConnectacomputerkeyboardtotheProcessorUnit.
MakesurethatthekeyboardworksintheST90userinterface.Openrelevant
functionsordialogboxes,andmakesurethatyoucantypeinthem.
2SelecttheicononthetopbartoopentheMessagesdialogbox.
aVerifythatnoerrormessagesarepresentedduringnormaloperation.
bClosethedialogboxbyselectingCloseor[X]initstoprightcorner.
3SelectHelponthetopbar.
aMakesurethattheonlinehelpopensonitsstartpage.
bClosetheonlinehelp.
Result
Requirements
Results
ThebasicfunctionalityoftheST90systemispresent.
Noerrormessagesarepresented.
Testprocedures