Konica Minolta 7222 User Manual

7222
7228
7235

Konica Minolta 7222 Specifications

General

Printing Technology	Laser
Print Speed (Black)	22 ppm
Copy Speed (Black)	22 cpm
Copy Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Fax Speed	33.6 Kbps
Duplex Printing	Yes
Operating System Compatibility	Windows, Mac
Display	LCD
Functions	Copy, Fax, Print, Scan
Paper Capacity	250 sheets
Network Connectivity	Ethernet

Summary

Safety Information

Caution Labels and Indicators

Details caution labels and indicators on the machine to prevent dangerous situations or serious injury.

Requirements for Safe Use

Outlines precautions for safe installation, power source usage, and routine handling.

Machine Information

Turning On the Power Switch

Provides step-by-step instructions for powering the machine on and off, including power save modes.

Loading Paper

Details how to load paper into various trays, including main body, DB-211, DB-411, LT-203, and bypass trays.

Changing Paper Size of Main Body Trays and DB-211 Trays

Explains how to adjust paper size settings in user-adjustable main body and DB-211 trays.

Copying Operations

Positioning Originals

Guides on how to place originals correctly in the RADF, mixed original mode, and on the platen glass.

Selecting Copy Size

Explains how to select copy size automatically using APS or manually via the touch screen.

Selecting Density Level

Details how to adjust copy density manually or use automatic exposure selection (AES).

Making Double-Sided Copies (1→2, 2→2)

Instructions for creating duplex copies from single- or double-sided originals using RADF or platen glass.

Copying Using Memory

Explains how to use memory for scanning originals or setting up jobs while a current job is in progress.

Stapling Output Copies (Staple)

Punching File Holes in Copies (Punch)

Making Fold in Copies (Fold / Fold & Stitch)

Helpful Functions

Making Sample Copy (Proof Copy)

Interrupt Copying

Storing Job Conditions (Job Memory: Job Store)

Instructions on saving frequently used copy job settings for later recall.

Recalling Stored Job Settings (Job Memory: Job Recall)

Troubleshooting

When “Call for Service” Message Is Displayed

Provides guidance on actions to take when the machine displays a "Call for Service" message.

Clearing Mishandled Paper

Step-by-step instructions for clearing paper jams indicated by codes on the screen.

When “JAM” Appears on Folder Key

Explains how to resolve paper misfeeds indicated by a flashing "JAM" status on the SETTING key.

When “ADD PAPER” Appears on Folder Key

Guides on how to resolve the "ADD PAPER" status when paper supply is depleted during a job.

When “Memory Full” Message Is Displayed (Memory Overflow)

Details actions to take when the machine runs out of memory during operations.

Applications

Inserting Sheets and Covers (Sheet/Cover Insertion)

Lay Out Several Pages onto One Sheet (Combination)

Making a Multiple Page Signature Booklet (Booklet)

Copying onto Transparent Films (Transparency Interleave)

Inserting Images into Printed Sets (Image Insert)

Dividing an Image into Right and Left Pages (Book Copy)

Details how to perform image division for copying books or ledger sheets onto multiple pages.

Erasing Outside of the Original (Non-Image Area Erase)

Repeating Selected Image Area (Repeat: Vert./Horiz. Mode)

Repeating Automatically or Selecting Repeating Times (Repeat: AUTO/ Repeat Mode)

Eliminating Black Copy Marks Along Borders (Frame/Fold Erasure)

Copying Image in the Center of Copy Paper (AUTO Layout)

Adjusting Position of Copy Image (Image Shift)

Reducing Images to Create Binding Margin (Reduce&Shift)

Printing Stamp, Page, Watermark onto Copies (Stamp)

Overlaying an Image onto Each Page Copied in the Job (Overlay)

Supplies

Adding Toner

Step-by-step instructions for adding toner when the supply is low.

Inserting a New Staple Cartridge into FS-113 Finisher

Guides on replacing the staple cartridge in the FS-113 finisher when it becomes empty.

Empty Trash Basket of FS-113 Finisher

Inserting a New Staple Cartridge into FS-114 Finisher

Details on replacing the staple cartridge in the FS-114 finisher when it is empty.

Inserting a New Staple Cartridge into SK-114 Saddle Kit

Instructions for replacing staple cartridges in the SK-114 Saddle kit mounted on the FS-114 finisher.

Empty Trash Basket of PK-114 Punch Kit

Maintenance

Cleaning Image Scanning Section

Details on cleaning the platen glass, cover, RADF partition glass, guide cover, and roller for optimal quality.

Cleaning Image Printing Section

Instructions for cleaning the writing unit glass and electrode wires to prevent copy defects.

Key Operator Mode

How to Access the Key Operator Mode

Explains how to access special Key Operator functions and navigate the mode.

[1] System Initial

[2] Copier Initial

Covers setting initial parameters like copy mode, density, magnification, paper tray, and output mode.

[3] Preset Key

[4] User Account (E.C.M.)

Explains how to monitor copying activity, manage user IDs, and set copy limits for billing.

[8] Key Operator Setting

[9] Weekly Timer

Details on scheduling copier power ON/OFF times for energy saving and managing timer interrupts.

[11] Power Save

[12] Memory Switch

[18] HDD Setting Menu

[19] Finisher Adjustment