|
User’s Manual 27
!
Use the Hyphen key to enter a “+” character for
international numbers, and use the Space One Touch
key to enter spaces.
6 Press the Start key to save your entry.
7 Enter your Sender ID. This is a descriptive title up to 32
characters long. Refer to the instructions below.
• To enter numbers, use the numeric keypad (press once)
• To enter spaces, use the 14/Space One Touch key
• To enter hyphens, use the Hyphen key
• To enter alphabet characters, locate the character you
want on the numeric keypad.
• Press that key repeatedly until the character appears on
the display.
• To enter a unique character, press the 0/Unique key
repeatedly until the character you want appears on the
display. The following characters are available: ! # & ‘ (
) * + , - . / : ; = ? · ä ß ñ ö ü Æ Å Ø æ å ø
• To enter two successive letters/numbers using the same
key, press the No © key to move to the next character.
• To move the cursor to make corrections, press the
Yes § and No © keys.
8 Press the Start key to save your entry. The display shows
NO=<CALL BACK NO.>.
9 After the display clears, use the numeric keypad to enter
the telephone number for call back messages.
Enter up to 20 characters.
!
Use the 14/Space One Touch key to enter spaces.
10Press the Start key to save your entry.
11Press the Select Function key to finish.
To Next Page
