Utility
12
C252 12-19
Utility Chapter 12
2
Reminder
The “Output Tray Setting” parameter is available only if optional finisher
FS-514 or finither FS-501 is installed.
[Bin Setting] only appears if the mailbin kit is installed.
“Tray 2” appears for the “Bin Setting” parameter only if the output tray is
installed.
AE Level Adjustment
2
Note
If the “Administrator Security Level” parameter in Administrator mode
was set to “Level 2”, [Output Setting] and [AE Level Adjustment] also ap-
pear.
Display setting
Sub Screen Display ON/OFF
Scan Basic Screen Default Setting
Description Default Setting
Specify the initial value for auto exposure. The higher the setting, the
more that the document background is emphasized.
2 (standard)
Description Default Setting
Sub Screen Display Type
• Setting value:
An image of the selected setting is displayed.
• Job List:
A list of the jobs that are being performed is displayed.
Setting value
Parameter Description
Default Tab Specify settings for scanning. For details, refer to the Network Scan-
ner Operations of the User’s Guide.
Program Default
Address Book Default In-
dex
Address Type Symbol
Display
To Next Page
Loading...
Need help?
General
