12
Utility
12-22 C252
Utility Chapter 12
Copier setting
Parameter Description Default Setting
Auto Paper Select for
Small Original
Select whether copying is permitted
when the “Auto Paper Select” setting is
selected and either no document is
placed on the original glass or the docu-
ment placed on the original glass is too
small for its size to be detected.
• Copy on Small Size:
The document size is determined to
be 5-1/2 × 8-1/2, and copies are pro-
duced on 5-1/2 × 8-1/2-size paper.
• Copy on Letter:
The document size is determined to
be 8-1/2 × 11, and copies are pro-
duced on 8-1/2 × 11-size paper.
• Prohibit Copy:
Copies cannot be produced since the
document size cannot be detected.
Before pressing the [Start] key, the
paper tray (paper to be printed on)
must be selected.
Prohibit Copy
Auto Booklet ON when
Fold & Staple
Select whether or not the “Booklet”
function is selected automatically when
the “Fold & Staple” setting is selected.
This parameter is available only if option-
al saddle stitcher or finisher FS-603 is in-
stalled.
Auto Select Booklet
Auto Zoom For Com-
bine/Booklet
Select whether or not the preset zoom
ratios are automatically selected when
“Auto Paper Select” is set and a Com-
bine Originals or Booklet setting is se-
lected.
• Auto Display Zoom Ratio:
The following zoom ratios are set.
2 in 1, Booklet × 0.647
4 in 1 × 0.500
8 in 1 × 0.323
• OFF:
No zoom ratio is selected automati-
cally.
Auto Display Zoom Ratio
Sort/Group Auto Change Select whether or not the “Sort” setting
is automatically selected when 2 or more
copies are set to be printed in a single
job.
•ON:
When a document is loaded into the
ADF and the [Start] key is pressed, the
“Group” setting is automatically se-
lected if the document consists of
only one page or the “Sort” setting is
automatically selected if the docu-
ment consists of two or more pages.
• OFF:
The “Sort” and “Group” settings are
not selected automatically.
ON
To Next Page
Loading...
Need help?
General
