Utility mode
11
C451 11-23
Blank Page Print Settings
2
Note
[Output Settings], [AE Level Adjustment] and [Blank Page Print Settings]
appear only if the “Administrator Security Levels” parameter in
Administrator mode is set to “Level 2”.
Description Default Setting
Select whether copying is permitted when the “Auto” Paper setting is
selected and either no document is placed on the original glass or the
document placed on the original glass is too small for its size to be de-
tected.
• Copy on Small Size:
The document size is determined to be A5, and copies are produced
on A5-size paper.
• Copy on A4:
The document size is determined to be A4, and copies are produced
on A4-size paper.
• Prohibit Copy:
Copies cannot be produced since the document size cannot be
detected. Before pressing the [Start] key, the paper tray (paper to be
printed on) must be selected.
Prohibit Copy
Description Default Setting
Select whether or not stamps and overlays are printed on blank pages. Do Not Print