Utility mode
11
C451 11-66
Leading Edge Adjustment (Duplex Side 2)
The starting print position at the leading edge for the second side during
automatic double-sided copying with each type of paper (with respect to the
paper feed direction) can be adjusted.
0 The starting print position is adjusted during manufacturing of the
machine. Normally, the starting print position will not need to be
adjusted.
1 Display the Administrator Settings screen.
– For details on displaying the Administrator Settings screen, refer to
“Displaying the Administrator Settings screen” on page 11-56.
2 Touch [1 System Settings].
The System Settings screen appears.
3 Touch [7 Expert Adjustment].
The Expert Adjustment screen appears.
4 Touch [2 Printer Adjustment].
The Printer Adjustment screen appears.
5 Touch [3 Leading Edge Adjustment (Duplex Side 2)].
The Leading Edge Adjustment (Duplex Side 2) screen appears.
6 Touch the button for the paper type to be set.
7 Press the [Start] key.
– Only paper loaded into the bypass tray can be used.
A test pattern is printed.
To Next Page
Loading...
Need help?
General
