EasyManua.ls Logo

Konica Minolta CM-M6 - Safety Precautions

Konica Minolta CM-M6
128 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
1
Safety Precautions
To ensure correct use of this instrument, read the following points carefully and adhere to them. After you have
read this manual, keep it in a safe place where it can be referred to anytime a question arises.
The latest instruction manual can be downloaded from the following URL:
http://www.konicaminolta.com/instruments/download/instruction_manual/
WARNING
(Failure to adhere to the following points may result in death or serious injury.)
Do not use the instrument in places where flammable or combustible gases (gasoline, etc.) are
present.
Doing so may cause a fire.
Be sure to turn the instrument OFF in areas where use is prohibited, such as in airplanes or
hospitals. Using the instrument in such areas may aect the electronics and medical equipment,
which may cause an accident.
Always use the AC adapter supplied as a standard accessory or the optional AC adapter (AC-A311),
and connect it to a 100-240 VAC (50/60 Hz) AC outlet of the rated voltage and frequency. If an AC
adapter other than those specified by KONICA MINOLTA is used, or if the adapter is connected to an
unsupported voltage, it may result in damage to the adapter, fire, or electric shock. To use the
instrument outside the area of purchase, please contact a KONICA MINOLTA-authorized service
facility.
If the instrument will not be used for a long time, disconnect the AC adapter power plug from the
AC outlet. Accumulated dirt or water on the prongs of the AC adapter’s plug may cause a fire and
should be removed. Clean o any dirt or water on the prongs of the AC adapter’s plug before use.
Firmly push the AC adapter power plug completely into the outlet. Incomplete insertion may cause
fire or electric shock.
Do not forcibly bend, twist, or pull the cords or cables. Also, do not scratch, or place heavy objects
on the cables. Doing so may damage the cable and cause a fire or electric shock.
Do not disassemble or modify the instrument or the AC adapter. Doing so may cause a fire or
electric shock.
Take special care not to allow liquid or metal objects to enter the instrument and the AC adapter.
Doing so may cause a fire or electric shock. Should liquid or metal objects enter the instrument,
turn the power OFF immediately, disconnect the AC adapter power plug from the AC outlet (or
remove the lithium-ion battery if using battery power), and contact the nearest KONICA MINOLTA-
authorized service facility.
Do not dispose of the lithium-ion battery in a fire, short-circuit, heat, or disassemble the battery.
Doing so may cause the lithium-ion battery to rupture or leak, which could result in fire or injury.
In the event that a lithium-ion battery leaks and the fluid comes into contact with the eyes, do not
rub the eye. Wash it with clean water, and then immediately consult a doctor. If the leaked fluid
comes into contact with skin or clothing, immediately rinse with water. In addition, stop using the
instrument if the lithium-ion battery has leaked.
When disposing of the lithium-ion battery used in this instrument, use tape or some other material
to electrically insulate the contacts. Contact with other metals may cause the lithium-ion battery to
overheat, rupture, or catch fire. Properly dispose of the lithium-ion battery according to local
regulations or recycle the lithium-ion battery.
The instrument should not be operated if it or the AC adapter is damaged, or if smoke or odd smells
occur. Doing so may cause a fire. In such situations, turn the power OFF immediately, disconnect
the AC adapter plug from the AC outlet (or remove the lithium-ion battery if using battery power),
and contact the nearest KONICA MINOLTA-authorized service facility.
Do not insert or disconnect the AC adapter plug with wet hands. Doing so may cause electric shock.

Table of Contents

Related product manuals