Konica Minolta CR-410

Questions and Answers

J
Jason BakerAug 14, 2025
What to do if Konica Minolta CR-410 Measuring Instruments measuring head and data processor cannot communicate?
- G
  grimesjillAug 14, 2025
  If the measuring head and data processor of your Konica Minolta Measuring Instruments aren't communicating, ensure both devices are powered ON. Use the provided RS-232C cable (standard accessory) for connection and remember to turn the power OFF before connecting.
B
Bonnie JordanAug 18, 2025
Why is data output to PC not possible with Konica Minolta CR-410 Measuring Instruments?
- A
  Andrea BaldwinAug 18, 2025
  If you're experiencing issues with data output to your PC, or commands are not being accepted by your Konica Minolta Measuring Instruments, ensure that you correctly connect the instrument's external output terminal to the PC's communication port using the included USB-Serial Converter Cable or RS-232C cable. Verify that the PC's communication settings are correctly configured for the instrument. Also, ensure that the device is in the PC mode screen (or the remote mode screen for the data processor).
R
Robert WestAug 21, 2025
How to fix a blank LCD on Konica Minolta CR-410 Measuring Instruments measuring head?
- N
  nmartinAug 21, 2025
  If the LCD on the measuring head of your Konica Minolta Measuring Instruments is blank, try the following: * Turn the power switch ON, or if connected to a data processor, turn its power switch ON. * If using the measuring head alone, insert batteries or connect the AC adapter. * Replace the batteries or connect the AC adapter. * Adjust the LCD contrast. * Return it to its original position.
J
Jessica DavisAug 25, 2025
What to do if Konica Minolta CR-410 data processor LCD is blank?
- J
  Joseph WernerAug 25, 2025
  If the LCD on the data processor of your Konica Minolta Measuring Instruments is blank, ensure that the power switches on both the measuring head and the data processor are turned ON. Try replacing the batteries with new ones or connect the AC adapter. You can also adjust the LCD contrast.
W
williammillerAug 27, 2025
Why does Konica Minolta Measuring Instruments print slowly and faintly?
- J
  jswansonAug 27, 2025
  If your Konica Minolta Measuring Instruments are printing slowly or the print is faint, replace the batteries with new ones or connect the AC adapter. For optimal performance, use lithium or nickel metal hydride batteries.
A
Anthony JohnsonAug 30, 2025
What to do if Konica Minolta CR-410 Measuring Instruments does not print?
- J
  Jeffrey WilliamsAug 31, 2025
  If your Konica Minolta Measuring Instruments are not printing, make sure you are using the optional thermal paper. Ensure that the paper is inserted correctly. If the device has a setting to turn printing ON, verify that it is enabled.
T
Tyler HernandezSep 3, 2025
Why is there variation in the measurement data from Konica Minolta CR-410 Measuring Instruments?
- T
  Thomas ElliottSep 3, 2025
  If you are experiencing variations in the measurement data from your Konica Minolta Measuring Instruments, make sure to position the instrument vertically to prevent light leakage. Avoid moving the instrument during measurement. Ensure you are using the same calibration channel for all measurements.
B
Brian FloresSep 6, 2025
What to do if Konica Minolta CR-410 measurement button has no effect?
- P
  Patrick HortonSep 6, 2025
  If the measurement button on your Konica Minolta Measuring Instruments has no effect, wait until the current process is finished before trying again. Ensure you are in the measurement screen. If needed, press the Escape key twice to return to the measurement screen.
G
gkellySep 10, 2025
Why does the ready lamp on Konica Minolta Measuring Instruments measuring head not come on?
- R
  Raymond CruzSep 10, 2025
  If the ready lamp on the measuring head of your Konica Minolta Measuring Instruments does not turn ON, try replacing the batteries with new ones. Alternatively, touch one of the keys.