Why are the measured values wrong on my Konica Minolta CL-70F Measuring Instruments?
If the measured values are incorrect on your Konica Minolta Measuring Instruments, ensure the Light Selection Ring is rotated until it clicks. Also, verify that the measuring mode is correct. In Cordless Flash Mode, the main flash's measurement may be inaccurate due to the pre-flash being measured first; disable the pre-flash function to resolve this.
What to do if Konica Minolta CL-70F Measuring Instruments does not turn on?
If your Konica Minolta Measuring Instruments do not turn on or display anything, try the following: First, press and hold the Power Button for at least one second. Next, check the batteries and replace them if necessary. Finally, wipe the batteries off with a dry cloth.
Why the memory function cannot be used on Konica Minolta Measuring Instruments?
If the memory function on your Konica Minolta Measuring Instruments cannot be used, first cancel the differential measurement mode. Also, note that the memory can store up to 999 values; clear any unnecessary stored values before attempting to measure and memorize new data.
Covers essential WARNING and CAUTION points for safe operation and product integrity.
Addresses specific warnings like PVC cable hazards and general maintenance guidelines.
Guides on attaching the strap, installing batteries, powering on/off, and checking battery status.
Explains the screen layout, touch controls, icons, and data input methods.
Covers selecting modes, exposure time, shutter speed, and display customization.
Details ambient light, flash measurements, monitor function, and error handling.
Guides on customizing settings, editing presets, and viewing item specifications.
Procedure for calibrating the meter's sensor to ensure accurate readings.
Covers touch panel adjustment, user information editing, field of view, and factory reset.
Provides definitions of technical terms and detailed specifications of the instrument.
General| Type | Colorimeter |
|---|---|
| Light Source | Pulsed Xenon Lamp |
| Measuring Time | Approx. 1 second |
| Measurement Area | Φ8mm |
| Spectral Response | CIE 1931 standard observer (2° field of view) |
| Sensor | Silicon Photodiode |
| Inter-Instrument Agreement | ΔE*ab 0.4 or less |
| Display | LCD |
| Interface | USB 2.0 |
| Power Supply | Rechargeable Lithium-ion Battery |
| Storage Temperature | -20 to 55°C (-4 to 131°F), noncondensing |
To Next Page
