Konica Minolta CL-70F - Measurement in Ambient Light Mode

61
5. Measuring Light Sources [Measurement Screen]
Operation
1.
On the Measurement screen, touch the [Measuring Mode] icon
and select the [Ambient Mode] icon on the next screen. (¨ P22)
Select the measuring mode.
2.
Touch the [OK] button.
Conrms and returns to the Measurement screen.
To return to the Measurement screen without conrming, touch the Cancel button.
5-2 Measurement in Ambient Light Mode
Select mbient Light Mode when taing measurements of natural light sunlight),
and continuous light sources such as L, tungsten lamps and uorescent lights.
NOTICE
Do not look directly into sunlight or other strong light when measuring. It may cause
severe eye damage or even loss of vision.
Measuring Mode Selection ScreenMeasurement Screen
Cancel utton utton