Need help?Do you have a question about the Konica Minolta CS-2000 and is the answer not in the manual?
General| Type | Spectroradiometer |
|---|---|
| Spectral Wavelength Range | 380 to 780 nm |
| Wavelength Pitch | 1 nm |
| Wavelength Accuracy | ±0.3 nm |
| Luminance Accuracy | ±2% |
| Color Temperature Accuracy | ±2% |
| Chromaticity Coordinates Accuracy | ±0.002 |
| Measurement Angle | 2° |
| Measuring Area | Depends on measurement angle and distance |
| Display Items | Luminance, chromaticity, color temperature, spectral data |
| Interface | USB 2.0 |
| Power Source | AC adapter (100 to 240 V AC, 50/60 Hz) |
| Operating Humidity | 85% RH or less (no condensation) |
| Dimensions | 210 mm (W) |
| Weight | Approx. |
Procedure for saving measured values with designated numbers.
How to delete stored measurement data.
Steps to register target colors for color-difference measurement.
Explains the role of target color as a reference for deviation.
How to select a target color for color-difference measurement.
Lists error messages, their causes, and corrective actions.
Table of symptoms, items to check, and corrective actions for instrument errors.
Explains the primary function of each key on the control panel.
Steps to turn the power switch ON.
Steps to turn the power switch OFF.
Explains calibration channels and how to set them.
How to initiate a measurement using the measurement button.
To Next Page
