49
Setting
Backlight ON/OFF During Measurement
The LCD backlight can be selectively turned on or off during measurement.
If the backlight is turned off, LCD backlight reflection on the surrounding area
affecting the measurement value during measurement can be avoided.
If pressing the BACKLIGHT key to turn off the backlight, while the MEAS screen is
displayed, the backlight is forcibly turned off independently of the following setting.
* Factory default setting : ON
1. Press
MENU
key when the MEAS
screen is displayed.
The MENU screen appears.
When the backlight of the LCD has been turned
off via
BACKLIGHT
key on the MEAS screen,
the backlight is turned on.
Operation Procedure
2. Press either or key to select
[SETUP] and then press
ENTER
key.
The MENU – SETUP screen appears.
The current set contents are displayed in the
[BACKLIGHT@MEAS] item.
OB SERVE R
2
°
DA TA
FO RM F
BA CKLIG HT
@
MEAS
O
N
MENU
SETUP
MEAS
MEMORY
TARGET
OP TION
SETUP
MENU
MEAS SNGL
UC00
SPD
N
r
m
Ob
s
2
˚
SYNC
No
n
ND
10
BL
on
LEN
S t d
cd
m
2
Lv
x
y
T01
35. 93
0 . 3968
0 . 4060
1
6, 7
2, 3, 4, 5
To Next Page
Loading...
