Konica Minolta CS-2000 - Setting Observer

33
Setting
4-c-2. Press either or key to set a
value.
key for larger number.
key for smaller number.
The setting range of integration time is from
5 to 120,000 ms.
4-c-3. Press either or key to move
the cursor.
4-c-4. Repeat the same procedures 4-a-
2. and -3. as necessary.
4-c-5. Press
ENTER
key.
The cursor moves to the IN-ND item.
This screen is used to determine whether
the ND filter built into the body is used or
not.
MENU
MEAS
MANUAL
INTEG T IM E
IN - N D O FF
0 0 0 5 0 0 . 0 0 0
m s
SP EED MODE
4-c-6. Press either or key to select
[ON] or [OFF].
Select [ON] when the error message
“OVER” appears.
4-c-7. Press
ENTER
key.
When the setting is entered, the MENU -
MEAS - SPEED MODE screen appears
again on the LCD.
MENU
MEAS
SP EE D MODE
NORMAL
F A S T
MULTI-NORMAL
MULTI-FAST
MANUAL
MENU
MEAS
MANUAL
INTEG T IM E
IN - N D O N
0 0 0 5 0 0 . 0 0 0
m s
SP EED MODE
MENU
MEAS
MANUAL
INTEG T IM E
IN - N D O FF
0 0 0 0 3 3 . 3 3 0
m s
SP EED MODE
MENU
MEAS
MANUAL
INTEG T IM E
IN - N D O FF
0 0 0 5 0 0 . 0 0 0
m s
SP EED MODE