Konica Minolta CL-70F - Performing Measurements

60
5. Measuring Light Sources [Measurement Screen]
5.
Measuring Light Sources
[Measurement Screen]
5-1 Measurement Method
5-1-1 Balancing Color Temperatures of Light Sources
Take a measurement by facing the Light Receptor
1
towards the light source to correctly
measure the color temperature of the light source.
NOTICE
●
When taking measurements, the CL-70F should be located at a distance that is
approximately 10 times (10X) the diameter of the light source being measured.
●
When measuring the light source, be careful not to measure the light reected off
from ceiling, wall or oor because precesion of measurements may be affected.
●
Because the precision of measurements may be affected, be careful not to
damage or dirty the white surface of the Light Receptor
1
. If the Light Receptor
1
becomes dirty, wipe it with a dry and soft cloth. Never use organic solvents such
as thinner or benzene.
●
There may be those who are sensitive to ash or other strong lights
(photosensitivity), and they may be negatively affected by light. Therefore, be
careful when people are nearby during measurement.
Light Receptor
1